Quadracer have done it again with the Enso RS, years of hard work understanding the dynamics of flight and easy to maintain builds they’ve combined what they have learnt in racing into a streamlined and modern freestyle frame!
No over-complicated designs, no weight where it doesn’t need to be, just solid, reliable, well thought out and rigid structure.
With ample room for any build, the Enso RS can support a full stack and two 20×20 mounting points.
We include TPU components that allow you to jump straight into a build with everything you need.
The frame is designed so the prop line is exactly on the top plate, evenly distributing half of the weight above and half of the weight below the centre of thrust.
The arms use a single hole release but multiple bolt securing and jam tightly together without any fiddly centre bracing.
The underside of the front plate is reinforced using a 2mm brace plate that is overlapped by the camera mount which interlocks with the brace plate and the bottom plate.
The rear antenna mount has embedded TBS and SMA mounting in addition to the AXII cup. The Immortal T mount twists between vertical and horizantal orientation and there are two loops to fit cable ties at 45 degrees for 2.4GHz mounting.
There’s an XT60 mount that can be moved to 1 of 4 standoffs and includes a fix point for strain relief.
We’ll include:
- Top Plate
- Bottom Plate (pre-installed press nuts)
- Cross Plate
- FIVE arms
- GoPro Ramp
- Camera Mount
- Rear Antenna Mount
- XT60 Mount
- Front Skid
- All necessary bolts
Reviews
There are no reviews yet.