We incorporated whole new design ideas to significantly improve our 4 in 1 product. It makes our product stronger, smaller, and better in performance. The core features of the product are listed below.
1.High reliability achieved by PCB design and manufacturing process. Eliminated the possibilities of internal breakage in manufacture and application, greatly improved reliability and survival rate.
2.To take users’ installation requirements into consideration by limiting the highest parts on PCB to 1.6mm. By this design it makes the flight tower low profile, and prevent interference’s between wires, ESC, and flight controller.
3.The potential interference’s between standoffs and electronic parts were also taken into consideration in design. Fragile parts are arranged far away from mounting holes.
4.Silicone ring inserts can insulate standoffs and ESC, and prevent impact of standoffs on PCB and electronic parts during crash.
5.The small size and square shape board is compatible with most frames.
6.The product comes with abundant and practical accessories. All 4 in 1 ESCs can use 3 different plug head in the package. Users can easily assemble the plug to fit different port definitions and wiring sequence of various flight controllers.
Input:2-5 Cell LiPo
Continuous Current: 25A
Burst Current: 35A≤10S
Current Detection: Yes
Mount holes: 20x20mm
Diameter of Mount holes: 3mm
1x 25amp 4in1 ESC
10cm red & black 16AWG wire
10x M3 shoulder washers (8 required, 2 spare)
25v 330μF capacitor
2x 1mm JST-SH 8-pin connectors